Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA5 #4: Mon Sep 20 16:45:55 EDT 2004
    mteterin@pandora:/backup/obj/usr/src/sys/DIOSCURI
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 244 (1792.82-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf58  Stepping = 8
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 2147418112 (2047 MB)
avail memory = 2063945728 (1968 MB)
ACPI APIC Table: <A M I  OEMAPIC >
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xff3fc000-0xff3fcfff irq 19 at device 0.0 on pci3
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xff3fd000-0xff3fdfff irq 19 at device 0.1 on pci3
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x9800-0x98ff mem 0xff3fe000-0xff3fefff irq 16 at device 10.0 on pci3
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
atapci0: <SiI 3114 SATA150 controller> port 0x9c00-0x9c0f,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xac00-0xac07 mem 0xff3ff400-0xff3ff7ff irq 17 at device 11.0 on pci3
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
ata5: channel #3 on atapci0
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xff3f8000-0xff3fbfff,0xff3ff800-0xff3fffff irq 19 at device 12.0 on pci3
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:30:13:5c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:81:30:13:5c
fwe0: Ethernet address: 02:e0:81:30:13:5c
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
amdpm0: <AMD 756/766/768/8111 Power Management Controller> port 0xe0-0xff,0xb400-0xb41f irq 19 at device 7.2 on pci0
amdpm0: could not map i/o space
device_attach: amdpm0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <AMD-8111> port 0xbc00-0xbc3f,0xb800-0xb8ff irq 17 at device 7.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
amr0: <LSILogic MegaRAID> mem 0xe69f0000-0xe69fffff irq 26 at device 7.0 on pci2
amr0: [GIANT-LOCKED]
amr0: <LSILogic MegaRAID SATA 150-6D> Firmware 712T, BIOS G116, 64MB RAM
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xff1e0000-0xff1effff irq 24 at device 9.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:e0:81:28:21:04
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
pcib4: <ACPI Host-PCI bridge> on acpi0
pcib4: could not get PCI interrupt routing table for \\_SB_.PCIB - AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib4
agp0: <AMD 8151 AGP graphics tunnel> mem 0xf0000000-0xf7ffffff at device 0.0 on pci4
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4
pci5: <ACPI PCI bus> on pcib5
drm0: <ATI Rage 128 Pro Ultra TF (AGP)> port 0xc800-0xc8ff mem 0xff5fc000-0xff5fffff,0xe8000000-0xebffffff irq 16 at device 0.0 on pci5
info: [drm] AGP at 0xf0000000 128MB
info: [drm] Initialized r128 2.5.0 20030725 on minor 0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
orm0: <ISA Option ROMs> at iomem 0xcd000-0xcd7ff,0xc8800-0xccfff,0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1792816586 Hz quality 800
Timecounters tick every 0.976 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ATAPI_RESET time = 60us
acd0: CDROM <FX320S/q01> at ata0-master PIO4
ATAPI_RESET time = 230us
ata1-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=1<ERROR> error=4<ABORTED>
afd0: REMOVABLE <IOMEGA ZIP 100 ATAPI/12.A> at ata1-slave BIOSPIO
ad6: 190782MB <ST3200822AS/3.01> [387621/16/63] at ata3-master SATA150
Waiting 15 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 953885MB (1953556480 sectors) RAID 5 (optimal)
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE Python 06408-XXX 8130> Removable Sequential Access SCSI-3 device 
sa0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Mounting root from ufs:/dev/ad6s1a
bge0: gigabit link up